Displaying items by tag: Romania
Romania: Saint-Gobain Romania has signed a 5-year renewable power purchase agreement (PPA) with OMV PetRom. Under the PPA, OMV PetRom will provide power from wind and solar power plants to Saint-Gobain Romania, beginning in January 2026. Total energy supplied under the contract will be 800GWh. This will cover 100% of the producer’s electricity consumption.
Etex uses price rises to drive revenue in first half of 2023
05 September 2023Belgium: Etex’s Building Performance division drove revenue in the first half of 2023 through price rises despite a softening in gypsum wallboard sales volumes. The group’s total revenue grew by 4% year-on-year on a like-for-like basis to Euro2.02bn in the first half of 2023 from Euro1.79bn in the same period 2022. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) rose by 14% to Euro363m from Euro319m in real terms.
Bernard Delvaux, the chief executive officer of Etex, said “In the first half of 2023, Etex coped with an overall slowdown of the construction sector - both in new build and renovation - triggered by several elements leading to high volatility and uncertainty such as inflation that puts pressure on consumers’ buying power, higher interest rates and more restricted loan policies by banks. However, Etex managed to record improved sales compared to the first half of 2022 through swift adaptations to challenging market contexts and cost-to-price monitoring. While our volumes are slightly impacted, margins remain strong.”
Notable events so far in 2023 include Etex’s acquisition of UK-based Superglass Insulation in June 2023. It divested its two Russia-based units under its Ursa subsidiary in August 2023. It also acquired Betacon, a Romania-based company to secure raw material supply for wallboard activities in the country.
Etex increases sales and earnings in 2022
17 March 2023Belgium: Etex's sales were Euro3.74bn in 2022, up by 25% year-on-year from 2021 levels. Its building performance division, which includes gypsum wallboard, recorded revenues of Euro2.43m, 65% of the group total. Etex said that the division’s market positions and results 'evolved positively,' and 'demonstrated leadership' in the face of raw materials price rises. The group's recurring earnings before interest, taxation, depreciation and amortisation (REBITDA) totalled Euro645m, up by 13%.
During the year, Etex's Romania-based subsidiary Siniat commissioned its new Euro1m gypsum drying and micronisation plant at its Aghiresu gypsum wallboard plant in Cluj. The market yielded turnover growth of 17% year-on-year for Siniat, to Euro72.5m
Etex recycled 54% more gypsum than in 2018 across its operations, making it 'the most advanced gypsum recycler in Europe,' according to the company. Its absolute CO2 emissions fell by 20% over the same period.
Update on Romania, December 2022
13 December 2022Two news stories to note over the last two months indicate growth in the gypsum wallboard market in Romania. Firstly, Knauf announced plans in mid-October 2022 to build a new 30Mm2/yr gypsum wallboard plant at Huedin in Cluj County. Then, Germany-based Grenzebach’s local subsidiary revealed that it had broken ground on the construction of an upgrade to its Iasi production centre.
Knauf’s announcement follows work by the existing wallboard producers with plants in the country to increase their own local capacity. Saint-Gobain started building a new production line at its Turda plant in mid-2021 at a cost of Euro45m. It hopes to have the project completed by April 2023. Etex started work in mid-2022 on a Euro6m sludge drying unit at a coal-fired power plant in Oltenia that will supply synthetic gypsum for use at its Turceni plant. It is also working on logistics upgrades to Turceni and a separate plaster plant at Aghiresu.
Graph 1: Growth rate of the construction market in relation to market volume in selected emerging countries, 2020 – 2030. Source: Saint-Gobain financial report using data from IHS.
An indication of Saint-Gobain’s interest in the Romanian market can be seen in its universal registration document for 2021 where it outlined its strategy. It presented a graph of forecast growth rates in construction markets in selected developing markets between 2020 and 2030. The countries that are underlined in Graph 1 (above) are those where Saint-Gobain made large acquisitions or investments in 2021. Romania is interesting on this graph because it is the European country with the largest predicted growth rate. It also has a relatively low market volume suggesting potential for market growth, although note that the graph only shows selected countries.
Another reason why Knauf might be interested in Romania is that it is the largest country in the European Union in which the company does not have a wallboard plant. Knauf’s own take from its press release about why it decided to build a plant in Romania was that local per capita consumption of gypsum wallboard was around 3m2/yr compared to at least 6m2/yr in more mature markets elsewhere in Europe.
Etex’s subsidiary Siniat Romania reported a 20% year-on-year rise in turnover to Euro60m in 2021. This compares to a 24% rise in turnover to Euro307m by Saint-Gobain Romania. Andrei Popa, Etex’s Country Sales Manager Romania & SEE, told Agenda Constructiilor that Siniat Romania’s turnover grew by 25% year-on-year in the first eight months of 2022. However, it is unclear what difference Etex Group’s acquisition of insulation producer URSA in June 2022 made to the figures in Romania. Popa also revealed that the rise in turnover so far in 2022 was mainly down to price rises. This in turn had been promoted by mounting energy costs, particularly gas. The company described itself as a ‘big consumer of gas’ and reported that the price had risen seven times over the past year. One more point of interest to mention is that Popa described Etex as one of the largest exporters in the country, with 40% of local production sent over national borders. This also aligns with what Knauf said about its new plant. It intends to deliver half of the production from its proposed plant at Huedin to Hungary, Serbia and the Republic of Moldova. The other half will serve the domestic market in the north of Romania with imports from Bulgaria expected to continue to supply the south of the country.
The data above suggests why Saint-Gobain, Etex and Knauf have all invested in wallboard production units in Romania over the last two years. The local market has growth potential and the companies are also focused on exports to neighbouring countries. All this investment may also have contributed to Grenzebach’s decision to enlarge its production site at Iasi too. The ‘fly in the ointment’ here in the short term is the disruption to energy markets caused by the war in Ukraine. Siniat Romania mentioned its concern over gas prices above. Saint-Gobain also made similar comments on a general basis for Europe in its nine month financial results in late October 2022. It said that it was preparing continuity plans for its gas-consuming plants in Europe but added that its gypsum wallboard production lines were ‘extremely flexible.’ However, Romania is better prepared for problems with gas supplies compared to elsewhere in Europe because it produces around 90% of its requirements locally. Despite energy concerns at the moment, the long term potential for the wallboard market in Romania remains promising.
Grenzebach Romania commences construction of Iasi production centre
30 November 2022Romania: Grenzebach Romania has broken ground on its construction of its upcoming Iasi production centre. The equipment supplier plans for the centre to serve as a hub for its European building materials, glass and intralogistics activities. Grenzebach chief executive officer Steven Althaus said that the group is expanding to meet growing European demand in the sectors in which it operates, while also creating 100 new jobs for Romanians.
Knauf to invest Euro76m in new gypsum wallboard plant in Romania
14 October 2022Romania: Germany-based Knauf has announced plans for the construction of a new gypsum wallboard plant at Huedin in Cluj County. The company said that it plans to invest Euro76m in the plant’s construction. It says that the investment will advance the Romanian government's 'energy savings offensive' by supporting a renovation drive for the country’s housing stock. The government aims to increase the national area of modern renovated properties by a factor of six, with a Euro30bn allocation from its Recovery and Resilience Fund.
Knauf's managing partner Alexander Knauf said “The commitment demonstrates our trust and confidence in the country and our employees. We look forward to becoming part of the local community. Together, we are setting new standards for building and living in Romania.”
Knauf had previously planned to build a 35Mm2/yr gypsum wallboard plant at Huedin at a cost of Euro70m. A mine at nearby Aghireșu would supply the planned plant with raw materials. The Aghireșu mine reportedly has 100 years' worth of gypsum reserves. Knauf first delayed its Huedin plant plans in 2009 in light of the economic situation at that time.
Etex reveals upgrade work in Romania
13 June 2022Romania: Belgium-based Etex invested Euro1m on upgrades to the logistics capacities of its Turceni gypsum wallboard plant and its Aghiresu plaster plant. It also started work on a Euro6m sludge drying unit at coal-fired power plant in Oltenia that will supply synthetic gypsum for use at Turceni, according to See News. The company operates locally under the Siniat Romania brand. It reported a 20% year-on-year rise in turnover to Euro59.6m in 2021.
Etex Building Performance to build Euro6m sludge drying plant at Rovinari coal-fired power plant in Romania
26 August 2021Romania: Etex Building Performance has announced plans to build a Euro6m sludge drying unit at Oltenia Energy Complex’s (OEC) Rovinari coal-fired power plant in Oltenia. The subsidiary of Belgium-based Etex will derive synthetic gypsum from the unit for use at its Turceni wallboard plant, according to Economica. It already operates a similar sludge drying unit at OEC’s Turceni coal-fired power plant.
Industrial director Gheorghe Budrugeac said "We count on the fact that both the OEC and the local and central authorities will understand the importance of the investment for the local community and the positive impact on the environment, therefore we expect no delays in the approval process."
Etex’s sales and earnings decline in 2020
07 April 2021Belgium: Etex’s full-year consolidated net sales were Euro2.62bn, down by 11% year-on-year from Euro2.94bn. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) fell by 16% to Euro468m from Euro557m. The group called its bottom-line performance ‘stunning.’ It reduced its debt by 95% to Euro15.0m from Euro331m.
The coronavirus outbreak impacted performance across all regions. At the peak of the outbreak’s impact on the group’s operations in April 2020, it had suspended operations at 48% of its facilities globally. In Europe, sales increased year-on-year in Germany and Romania. This, a dynamic plasterboard market in the Netherlands and ‘good’ group performance in Eastern Europe failed to offset the regional decline. The impact was notably severe in the Benelux countries and the UK in the second quarter of 2020. In Latin America, sales were comparable with 2019 levels on a like-for-like basis. Asian and African sales experienced a decline, partly offset by the opening of new markets in Australia prior to the acquisition of Knauf Plasterboard in February 2021.
Chief executive officer Paul Van Oyen and chair Jean-Louis de Cartier de Marchienne said, “Although our order book for the first half of 2021 is positive, we expect our revenue to be affected by Covid-19-related volatility this year and the next. Despite this forecast, the performance culture that we have invested in over the last year is firmly in place and delivering results. In addition, our strategic acceleration of sustainability and customer experience initiatives will continue to bear fruit moving forward.” They added, “The acquisitions we made in 2020 will fuel our future growth in high-potential markets. In 2021, we will continue to identify new opportunities, as we are currently in an excellent position to make significant additional investments.”
Romania: Saint-Gobain has begun construction of a new line at its Turda gypsum wallboard plant in Cluj county. The company plans to invest Euro45.0m in the project. The scheduled completion date is April 2023. The group says that the expansion aims to meet ‘rapidly growing’ local needs as well as those of the wider Central and Eastern European market, and to secure Saint-Gobain's leadership position within light construction.