Gypsum industry news

Belgium: Eurogypsum, the European federation of national associations of producers of gypsum products, has welcomed proposed changes to the European Union’s (EU) Construction Products Regulation (CPR). It said that it welcomed “…the proposal presented by the European Commission (EC) on 30 March 2022 as an ambitious basis to strengthen and modernise the existing rules, as well as to speed up the uptake of sustainable and circular practices in the construction product manufacturing industry.”

In preliminary feedback comments the association said that it supports a European Committee for Standardisation (CEN) driven system as opposed to increased regulatory powers for construction material manufacturing that the new proposals might create. For the assessment of the environmental performance of products the association wants more clarity about any potential new digital approach. It reiterated that it supports the continued use of Life-Cycle Assessments (LCA) and Environmental Product Decelerations (EPD). It also called for product labelling to be provided in an electronic format with easy-to-understand pictograms as the norm. However it suggested that any consumer should be able to request a paper version if required.

The CPR regulations were originally introduced in 2011 and are recognisable to consumers through the use of the CE (Communauté Européenne) markings on certain products. The EC has since decided to revise the regulations to fit with newer policy priorities including the European Green Deal.

Members of Eurogypsum, the European Gypsum Association, gathered at the Les Atelier des Tanneurs in Brussels on 27 - 28 April 2022 to formally celebrate the 60th Anniversary of their association, despite a delay of 12 months due to Covid restrictions. Over two days, they participated in meetings and panel sessions reminiscent of pre-pandemic times. Attending the Open Congress session on 28 April 2022, Global Gypsum found the event to be very dynamic and surprisingly open.

The Open Congress began with welcomes from the moderator, Knauf Insulation’s Sian Hughes and outgoing Eurogypsum President Emmanuel Normant, of Saint-Gobain. He introduced the past 60 years as one of ‘enormous change’ for the sector, but this was not meant to be a retrospective. Turning to the next 60 years, Normant said that gypsum’s inherent benefits, including its low embodied CO₂ emissions, recyclability, high degree of safety and ease of use, would make it even more crucial to global development in the future than in the past.

A series of quick-fire presentations from the industry’s big hitters then highlighted a wide range of ways to increase the sustainability of our sector.

Saint-Gobain’s Klaus Birk introduced Gyproc's project to switch its Fredrikstad wallboard plant in Norway to use a 100% electric wallboard production process by 2023. This will use renewable energy, predominantly sourced from hydroelectric power, and lead to a 70% drop in CO₂ emissions. This approach could be applicable to any wallboard plant with access to sufficient renewable power.

Knauf's Jörg Demmich then spoke about a project to extract gypsum from the ‘waste’ from the lithium production process. Even the best lithium ores only contain 3 - 6% lithium by mass, leaving 94 - 97% currently unused. As electric mobility grows, by-product gypsum from the lithium sector could partly offset the expected fall in flue-gas desulphurisation (FGD) gypsum supplies.

Iryna Yermakova introduced the Etex Group's approach to the wallboard plant of the future. One area she highlighted was the potential for prefabrication at the wallboard plant before panels reach the job site. This has the potential, on some projects, to save up to 10% of the wallboard cost, transport cost and CO₂ emissions of the board used. Surely a quick win for contractors.

Nikolai Halle from Cobuilder introduced the Define tool, freely-available to the construction sector. Define will act like the Swift payment system, but for sustainability data instead of financial data. This would unify different sustainability metrics to cut through the confusing terms used by producers and reveal the 'real' performance of different products, rather than how effectively their attributes are marketed.

The keynote presentation, from the former European Commissioner for the Environment Janez Potočnik – ‘The Father of the Circular Economy’ - then highlighted why innovation is key, not only to the future of the gypsum sector, but to the planet itself. At current rates, the mass of man-made material will be three times larger than all biomass by 2040.

To avoid this, Potočnik argued that the entire economy needs to become service-based, rather than product-based. Under such a model, wallboard producers would become part of the ‘building envelope services sector’ rather than selling wallboard. The desire is then to sell wallboard with a long service life, that can be repurposed and recycled, rather than selling ever-increasing volumes of board.Taking this approach across the entire economy would help society to maximise gross domestic product while reducing environmental impacts, eventually decoupling them from each other entirely. Potočnik concluded that nature is already the 'perfect' circular economy. Humans just need to reintegrate into it.

To say that the panel discussion that followed was ‘lively’ would be an understatement. Member of the European Parliament Iskra Mihaylova, speaking the day after Russia halted gas supplies to her native Bulgaria, said that talk of energy independence and solidarity was 'not enough' and that Europe needed to act on the European Union Green Deal, particularly with a view to energy and resource efficiency and security.

Josefina Lindblom, the European Commission’s Policy Officer for Sustainable Buildings for Circular Economy, introduced what she hoped would become the next buzzword: ‘sufficiency’ - properly taking pause to consider what is truly required of new buildings. This includes the need to apply full circularity to renovation projects.

Adrian Joyce, from the European Alliance of Companies for Energy Efficiency in Buildings, asked the audience to think not in terms of 'energy efficiency,' but 'conservation of energy.' The two terms are subtly different, with the latter akin to ‘sufficiency.' Both point to the need to reduce the use of resources, not just the effectiveness which we use increasing amounts of resources.

Tristan Suffys, Secretary General of Eurogypsum, said that gypsum is well suited to fit into the low-CO₂, low-resource-use sector of the future. He called for re-use of derelict buildings, re-purposing and optimising the use of space by building above existing buildings.

The Open Congress drew to a close with a speech by the incoming President of Eurogypsum (and Head of Corporate Social Responsibility at Etex) Jörg Ertle. He told Eurogypsum members that the 'doors' marked 'Green Deal,' 'Decarbonisation,' and 'Recycling' were all 'open' and that they should be making the most of the opportunities behind each. From Global Gypsum’s perspective, it seems that they have burst through each of the doors into the rooms behind. Some are even measuring up for wallboard.

In conclusion, it appears that the European wallboard sector is at the start of a major increase in sustainability efforts. This will be backed by politicians who are keen to decouple their economies from Russia’s and a public that is increasingly asking for change. And, with three major global producers - Knauf, Saint-Gobain and Etex - based in Europe, between them sharing 47% of the world’s wallboard capacity, we can expect to see these innovations spread to other regions rapidly.

Here’s to the next 60 years!

Belgium: Etex has raised Euro800m through a sustainability-linked medium - long-term unsecured loan. The producer says that the private placement, called a Schuldschein in German finance law, comprises three Euro-denominated tranches with maturities of three, five and seven years, at fixed and floating rates.

CEO Bernard Delvaux said “We are very pleased with this new Schuldschein issuance which we successfully completed in a challenging context. It testifies to a significant appreciation of Etex’s credit quality, of its performance of the last years and it demonstrates the investors’ confidence in the company’s strategy. Moreover, this operation broadens our investors’ base at attractive market conditions, increases the number of maturities and considerably extends the duration of our debt profile.”

Belgium: Eurogypsum’s board of directors has elected Jörg Ertle president of the association. The Etex head of corporate social responsibility will succeed Saint-Gobain Group vice-president for sustainable development Emmanuel Normant, who now takes over the position of Eurogypsum vice-president. Knauf Group Central Europe managing director and Knauf Gips chair Christoph Dorn will serve as the association’ new treasurer.

Ertle studied mining and mineral engineering at RWTH University Aachen and holds a Ph.D in environment technology from Berlin Technical University. He has over 20 years’ gypsum industry experience, including time spent in management roles Lafarge before and after its acquisition by Etex. Having previously headed Etex’s worldwide gypsum sourcing, Ertle took on his current role in the group in 2019. He has also participated in different Eurogypsum working groups concerning raw material policy, and has chaired the association’s Environment and Sustainability Committee since 2018.

Ertle said “I am taking over Eurogypsum’s presidency at a challenging time for Europe, with a global climate and environmental challenge, as well as a particularly unstable international environment. Economic actors are working under increased regulatory and financial pressure.” He added “I am convinced that gypsum solutions are a strong enabler to facilitate this transition, supporting the ambitions of the European Green Deal.”

Belgium: ETEX recorded consolidated net sales of Euro2.97bn in 2021, up by 14% year-on-year from Euro2.62bn in 2020. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) rose by 12% to Euro522m from Euro468m, while its profit for the year dropped by 1.4% to Euro198m from Euro201m. The group’s building performance recorded like-for-like sales growth of 21% from 2020 levels and of 15% from 2019 levels. Its gypsum wallboard volumes grew year-on-year, while strong demand in all regions except South Africa impacted some export businesses through supply chain issues and increased shipping costs. The company adapted its prices to offset a sharp rise in raw material and energy cost prices.

During the year, ETEX acquired a top-three Australian gypsum wallboard producer and completed its rebranding as Siniat. It also diversified with the launch of a fourth group division, new ways, which includes light steel framing production operations.

Belgium: Eurogypsum will celebrate its 60th anniversary at an event in Brussels to be held on 28 April 2022. The event will include a keynote speech by Janez Potočnik, a former European Commissioner for the Environment and architect of the commission’s circularity agenda. There will also be a panel discussion, bringing together leading policymakers to discuss opportunities to advance the European Union’s sustainability agenda in the built environment, the official launch of association’s EG60 guide and a photo exhibition. The full programme will be announced in due course. The European federation of national associations of gypsum product manufacturers was founded in 1961.

Russia: Belgium-based ETEX has announced the suspension of all of its Russian activities ‘immediately and until further notice.’ The gypsum wallboard producer operates two sites for the import and sale of fibre cement façade materials near Moscow. It says that it will take care of the 50 colleagues it employs there.

The group said “We will continue to do everything we can for the safety and well-being of all our teammates and hope that peace will prevail quickly.”

UK: Belgium-based Etex has announced a new UK trading agreement with Kier, a provider of construction and infrastructure services.The arrangement will see Etex and Kier collaborate on a variety of new projects using Etex’s products, including its Siniat brand wallboard.

Gerard Cox, Head of Procurement for Kier Construction, added “We are excited to include Etex Building Performance to our carefully selected list of preferred supply chain partners and look forward to engaging with them on our projects where we believe their range of products, warrantied systems and customer focussed approach, have the potential to add real value to our business.”

Etex previously said it plans to start operations at its new wallboard plant at the Port of Bristol in 2022. It has invested around Euro165m in the project that is set to double its production capacity in the UK.

Belgium: Etex has donated five sustainable modular housing units to families dispossessed by flooding in the summer of 2021. The company built the houses at Rochefort and Pepinster in two weeks and their assembly took 48 hours. Etex said that it plans to develop the construction method in future in order to meet needs and new trends in the housing sector.

Bernard Delvaux, chief executive officer of Etex said “It was important for us to donate our expertise through these five houses built in a circular way with a very low carbon footprint. Our modular construction technologies meet multiple housing needs around the world with the fast construction of affordable, well-insulated, high-quality and attractive living spaces.”

Belgium: Etex’s 2020 Sustainability Report has recorded the company’s progress towards its sustainability goals under four headings. Under the heading ‘carbon neutrality,’ it produced and purchased 72% of its electricity consumption renewably, compared to 14% in 2019. Under ‘health, safety and wellbeing,’ its lost-time accidents per million working hours fell by 36% year-on-year to 1.4 from 2.2. Under ‘waste management and circularity,’ it reduced its waste generation by 8.9% to 254Mt from 278Mt and reduced the share of its waste sent to landfill to 18% from 26%. Lastly, under ‘diversity and inclusion,’ 28% of the company’s newly hired staff were women, compared to a group total share of 19%.

CEO Paul van Oyen said “At Etex, we have a clear commitment to helping build a better, sustainable future. We seek to offer holistic value to our customers, employees, shareholders and other stakeholders, as we continue to decouple our growth from environmental and social impacts. To help achieve this, we focus on lightweight materials and prefabricated construction. These methods offer advantages such as reduced raw material use, energy consumption, waste and emissions. Even more, they contribute to enhanced long-term circularity by creating opportunities for deconstruction, reuse and recycling.”