Gypsum industry news

Romania: Saint-Gobain Romania has signed a 5-year renewable power purchase agreement (PPA) with OMV PetRom. Under the PPA, OMV PetRom will provide power from wind and solar power plants to Saint-Gobain Romania, beginning in January 2026. Total energy supplied under the contract will be 800GWh. This will cover 100% of the producer’s electricity consumption.

Italy: Saint-Gobain has entered into a 10-year power purchase agreement (PPA) with Switzerland-based utilities provider Axpo Holding. Under the agreement, Axpo Holding will supply 22GWh/yr of renewable electricity from a newly built wind farm in Puglia. The deal will fulfil 11% of Saint-Gobain's Italian energy needs across 10 sites.

The latest PPA with Axpo Italia is Saint-Gobain's fifth in Italy. Collectively, these will bring the group’s reliance on renewables in its Italian operations to 20%.

Securing sustainable energy sources has been the priority for some of Spain’s gypsum wallboard producers in recent weeks.

In late November 2023 Pladur revealed that it plans to use green hydrogen at its production plants from the second half of 2024 onwards. It will start at its Valdemoro plant near Madrid before rolling usage out elsewhere afterwards. The subsidiary of Belgium-based Etex is also considering trials with biomethane and biogas. Then a few weeks later in early December 2023 Knauf Ibérica announced that it is planning to build a 7.5MW biomass unit at its Guixers plant in Lleida. Commissioning is currently scheduled for late 2024. This follows the installation of solar panels at the site earlier in 2023. Along similar lines, Saint-Gobain Placo signed an 11-year power purchase agreement (PPA) with electricity company Endesa at the end of 2022 to supply 150GWh/yr of renewable energy. Together with a previous renewable energy deal this was expected to cover up to 65% of the group’s electricity requirements in Spain.

Wallboard plants all over the world have been embarking on sustainable energy drives in recent years but the particular drivers in Spain are worth mentioning. The country’s high electricity prices have frequently been raised by large-scale industrial users in the past, often in terms of competitiveness of exports. However, the situation worsened following the start of the war in Ukraine in early 2022 as the wholesale price of coal and gas jumped. The high price of gas in particular pushed the electricity prices up in Spain and wallboard plants typically use both sources of energy. The government eventually capped the price of gas and coal for power generation. It then offered an aid scheme for large-scale gas users but missed the gypsum sector out, much to the chagrin of the Asociación Técnica y Empresarial del Yeso (ATEDY), which complained about it at the end of 2022. The gypsum industry was later included in July 2023 when a funding scheme was announced. It’s unknown how much this initiative has helped wallboard manufacturers but the shift to renewables by the three main companies mentioned above tells its own story.

Despite the energy supply problems a new entrant to the wallboard market in Spain announced itself in March 2023. Italy-based Fassa Bortolo said it was going to spend Euro90m on building a wallboard plant at Tarancón in Cuenca. No commissioning date or main supplier name has been disclosed, but Italy-based Bedeschi did say in late November 2023 that it was providing raw bulk material handling equipment including an apron feeder, stacker, excavator and conveyor belt line. There has also been no word on how the new plant will power itself.

On the topic of exports, Spain has long been one of the world’s larger shippers of natural gypsum. Data from the Geological and Mining Institute of Spain (IGME) shows that the country exported 9.2Mt of gypsum in 2021 with a value of Euro60m. Whether this changed in 2022 when the energy prices increased is unknown at the time of writing. In 2021 Almería was the epicentre of the country, accounting for 70% of the 13Mt total volume of gypsum extracted that year with a quarry at Sorbas, operated by Saint-Gobain Placo, reportedly being the second largest in the world. Most of the gypsum extracted at Sorbas was then driven by truck to the Port of Garrucha, making it the busiest gypsum port in Europe by volume.

Eurogypsum, the European federation of national associations of producers of gypsum products, launched its industry roadmap to net-zero by 2050 on 9 November 2023 at the Global Gypsum Conference 2023, which took place in Chicago, US. Various actions and technologies were unveiled as part of the plan including some of the approaches being taken in Spain such as using ‘green’ electricity, biomass and green hydrogen. All of these suggestions were split into short, mid and final term feasibility categories. So, for example, using renewable sourced electricity is dependent on it being affordable and available. It was placed in the immediate category. Yet, using biofuels or green hydrogen is flagged as requiring investment, so deemed as short-to-mid term.

Spain presents a case where the cost of energy for industrial users may be aligning with sustainability goals. How this translates onto balance sheets remains to be seen though. These kinds of sustainable energy projects may only be slowing the inevitable as raw material and energy costs mount anyway leading to tighter margins, increased competition and potential consolidation. The gypsum sector in Spain may well be testing out slightly earlier than elsewhere how much a more sustainable world will actually cost.

Canada/US: Saint-Gobain has signed a 15-year renewable electricity supply agreement (PPA) with TotalEnergies for the purchase of solar power for its 125 industrial sites in the US and Canada. This 100MW PPA, known as the Danish Fields Solar Project (Danish Fields), is expected to offset Saint-Gobain’s North American CO₂ emissions from electricity (scope 2 emissions) by 90,000t/yr. The project is expected to come online by the end of 2024.

Danish Fields is the third PPA signed in North America by Saint-Gobain. The first PPA, with the Blooming Grove Wind Farm in Illinois, was signed in 2020, and the second, with TotalEnergies’ Cottonwood Bayou Solar Project in Texas, was signed in 2022. All three projects have been supported by Edison Energy, a leading energy and sustainability advisory that consults with the largest commercial, industrial and institutional energy users.

Mark Rayfield, the chief executive officer of Saint-Gobain North America, said “With this agreement, Saint-Gobain North America will further reduce its CO₂ emissions, demonstrating how fast the manufacturing industry can transform when long term solutions are at hand. This renewable energy project is a new milestone on the way to meeting Saint-Gobain’s commitment to reduce scope 1 and 2 CO₂ emissions by 33% by 2030 - compared to 2017 - and to reach carbon neutrality by 2050.”

The three projects combined are expected to represent a reduction of more than 70% in Saint-Gobain North America’s scope 2 emissions, compared to 2017 levels.

North America: Saint-Gobain has signed a 100MW solar power purchase agreement (PPA), called Danish Fields, with TotalEnergies. The Danish Fields PPA will supply Saint-Gobain North America with solar energy for 15 years, commencing in 2024. Saint-Gobain says that it expects the PPA to eliminate 90,000t/yr of CO₂ emissions across its operations. This is the group’s third deal of its kind.

Saint-Gobain North America CEO Mark Rayfield said “With this agreement, Saint-Gobain North America will further reduce its CO₂ emissions, demonstrating how fast the manufacturing industry can transform when long term solutions are at hand. This renewable energy project is a new milestone on the way to meeting Saint-Gobain’s commitment to reduce Scope 1 and 2 CO₂ emissions by 33% by 2030 compared to 2017, and to reach carbon neutrality by 2050.”

India: Saint-Gobain has signed a power purchase agreement (PPA) with Vibrant Energy, a subsidiary of Macquarie Asset Management's Green Investment Group (MAM-GIG), to provide wind and solar electricity to six local sites. The 20-year PPA will start in 2024 and bring the company’s national renewable electricity share to 65% in 2025. Under the agreement, Vibrant Energy will provide Saint-Gobain with 189GWhr/yr of renewable electricity. The company says that it is on target to achieve 100% renewable electricity in India by 2030 by replacing fossil fuels with biomass, using waste heat recovery and other measures.

Saint-Gobain India operates 76 manufacturing plants in the country including four gypsum wallboard units.

Spain: France-based Saint-Gobain has signed a power purchase agreement (PPA) with Endesa. The 11-year agreement will start in 2024 and will cover around 55% of Saint-Gobain’s local electricity requirements. Endesa will supply 150GWh/yr of renewable energy. This agreement will enable a reduction in CO₂ emissions of roughly 39,000t/yr. This is the second renewable energy supply agreement signed by Saint-Gobain in Spain. Together, the two agreements will cover 65% of the group’s electricity needs in Spain.

Poland: Saint-Gobain has signed a renewable electricity agreement (Power Purchase Agreement) with Tion Renewables AG (currently being renamed from Pacifico Renewables Yield AG), the German wind and solar power producer. The 15-year agreement will run from 2025 and cover around 45% of Saint-Gobain Poland's electricity needs.

"This power supply agreement is an important milestone for Saint-Gobain in Poland. It will contribute to a significant reduction in our CO₂ emissions, in line with the group's commitment to achieve carbon neutrality by 2050' said Joanna Czynsz-Piechowiak, chief executive officer of Saint-Gobain Poland. "It will enable a reduction in CO₂ emissions of 135,000t/yr, i.e. nearly 20% of Saint-Gobain's scope 1 and 2 emissions in Poland.

The PPA foresees the purchase of approximately 190GWh of wind energy annually. This is equivalent to supplying about 100,000 European homes with renewable electricity each year. The total capacity of the wind farms is equivalent to circa 52MW spread over three sites and 20 wind turbines. This announcement illustrates how Saint-Gobain is stepping up the pace on its carbon neutrality roadmap and comes in the wake of the recent endorsement by the Science Based Targets initiative of the group's commitments to reduce CO₂ emissions by 2050.