Gypsum industry news

Romania: Belgium-based Etex invested Euro1m on upgrades to the logistics capacities of its Turceni gypsum wallboard plant and its Aghiresu plaster plant. It also started work on a Euro6m sludge drying unit at coal-fired power plant in Oltenia that will supply synthetic gypsum for use at Turceni, according to See News. The company operates locally under the Siniat Romania brand. It reported a 20% year-on-year rise in turnover to Euro59.6m in 2021.

Romania: Etex Building Performance has announced plans to build a Euro6m sludge drying unit at Oltenia Energy Complex’s (OEC) Rovinari coal-fired power plant in Oltenia. The subsidiary of Belgium-based Etex will derive synthetic gypsum from the unit for use at its Turceni wallboard plant, according to Economica. It already operates a similar sludge drying unit at OEC’s Turceni coal-fired power plant.

Industrial director Gheorghe Budrugeac said "We count on the fact that both the OEC and the local and central authorities will understand the importance of the investment for the local community and the positive impact on the environment, therefore we expect no delays in the approval process."

Belgium: Etex’s full-year consolidated net sales were Euro2.62bn, down by 11% year-on-year from Euro2.94bn. Its earnings before interest, taxation, depreciation and amortisation (EBITDA) fell by 16% to Euro468m from Euro557m. The group called its bottom-line performance ‘stunning.’ It reduced its debt by 95% to Euro15.0m from Euro331m.

The coronavirus outbreak impacted performance across all regions. At the peak of the outbreak’s impact on the group’s operations in April 2020, it had suspended operations at 48% of its facilities globally. In Europe, sales increased year-on-year in Germany and Romania. This, a dynamic plasterboard market in the Netherlands and ‘good’ group performance in Eastern Europe failed to offset the regional decline. The impact was notably severe in the Benelux countries and the UK in the second quarter of 2020. In Latin America, sales were comparable with 2019 levels on a like-for-like basis. Asian and African sales experienced a decline, partly offset by the opening of new markets in Australia prior to the acquisition of Knauf Plasterboard in February 2021.

Chief executive officer Paul Van Oyen and chair Jean-Louis de Cartier de Marchienne said, “Although our order book for the first half of 2021 is positive, we expect our revenue to be affected by Covid-19-related volatility this year and the next. Despite this forecast, the performance culture that we have invested in over the last year is firmly in place and delivering results. In addition, our strategic acceleration of sustainability and customer experience initiatives will continue to bear fruit moving forward.” They added, “The acquisitions we made in 2020 will fuel our future growth in high-potential markets. In 2021, we will continue to identify new opportunities, as we are currently in an excellent position to make significant additional investments.”

Romania: Saint-Gobain has begun construction of a new line at its Turda gypsum wallboard plant in Cluj county. The company plans to invest Euro45.0m in the project. The scheduled completion date is April 2023. The group says that the expansion aims to meet ‘rapidly growing’ local needs as well as those of the wider Central and Eastern European market, and to secure Saint-Gobain's leadership position within light construction.

Romania: Siniat Romania increased its turnover by 6% year-on-year to Euro51.3m in 2020. It attributed this to a growing residential sector, higher demand for logistics spaces and the need for adapted office due to the coronavirus pandemic, according to See News. The subsidiary of Belgium-based Etex Group expects turnover to rise by 5 – 10% to around Euro56m in 2021.

"The construction market in Southeast Europe was one of the most resilient economic segments in 2020. The shock caused by the spring lockdown was followed by a rapid recovery and by an increase in the second half of the year," said Etex Building Performance commercial director Andrei Popa.

The company operates two gypsum wallboard plants in the country and it holds an estimated market share of over 25%. Almost half of the output of the two plants is exported to 11 countries in Southeast Europe.

Romania: Etex has proposed investing Euro6m at the Rovinari thermal power plant run by Oltenia Energy in order to secure supplies of flue gas desulphurisation (FGD) gypsum for its Turceni wallboard plant. It wants to build a desulphurisation unit at the power plant following falling energy production at the Turceni power plant, according to Economica. Etex is currently in negotiation with Oltenia Energy over the proposal.

Romania: France’s Fives has supplied a new FCB TSV1600 MF for Etex’s calcined gypsum grinding plant in Aghires. The project is part of an upgrade to the unit to close the existing open circuit. Commissioning took place in late January 2019.

Romania: Siniat Romania, part of Belgium's Etex, will close its plant in Bucharest and quarry in Nucsoara in February 2016 in order to concentrate production at its recently-opened Turceni plant.

The decision was taken because Turceni has a better geographic proximity to the company's sales markets in south-east Europe, according to General Manager Marc-Andre Fritsche. The Turceni plant was opened in October 2015 in Gorj, south-west Romania, with an investment of Euro50m. It will incorporate the company's wallboard production activity and extend the portfolio with more complex products.

Siniat Romania has another plant in Aghiresu, Cluj. It posted a Euro25.8m turnover in 2014 and a loss of Euro1.15m.

Romania: Siniat Romania, part of Etex, has opened a gypsum plant in Turceni, Gorj, following a Euro50m investment from its own funds.

The gypsum wallboard plant encompasses 320,000m² of land and is the largest in Romania, according to the company. With a production capacity of 27Mm2 of wallboard, the unit serves a strategic purpose for Siniat Romania, covering 10 markets across south-east Europe.

The Turceni plant is the first in Romania that uses synthetic gypsum produced from the gas desulphurisation process from a power plant. The gypsum has high purity and consistency and is an excellent feedstock for wallboard. In addition, water used in the production process will come from rainwater collected from the roofs of the plant and drilled wells, thus limiting resource consumption, while waste water will also be internally recycled.

Siniat has also invested Euro1m in the construction of a new road that links the plant to the national road, limiting the impact of heavy vehicles on the local community. The plant provides 80 new employment opportunities for the local community, with the new employees being trained in Siniat plants in Romania, Italy and Germany.

"Siniat plays an active role in local communities. We particularly appreciate the labour force in Romania, with well-trained and motivated people. We constantly invest in technology and use high quality raw material. We develop in a stable economic environment with high potential. Our goal is to capitalise on this potential," said Marc-André Fritzsche, General Manager of Siniat Romania. Siniat Romania has two other plants in Bucharest and Aghiresu (Cluj).

Romania: Siniat Romania, part of Belgian industrial group Etex, will open a Euro50m wallboard plant in Turceni, southern Romania in October 2015.

The company will create 80 new jobs in the production division of the plant. Some 80% of the staff has already been recruited. The plant will produce plasterboard using synthetic gypsum from power producer CET Turceni. It will be the only plant in Romania to use synthetic gypsum from the flue gas desulphurisation process at a thermal power plant, according to Siniat.