Gypsum industry news

US: Advanced materials producer Xeriant plans to enter trial production of its recycled plastic-based gypsum wallboard alternative, NEXBOARD. Plastic products company TMF Corporation will support production by agglomerating post-industrial plastic waste and densifying it, along with different eco-friendly flame retardants, for use as feedstock.

US: USG says that the Science Based Targets initiative (SBTi) has approved its 2030 emission reduction targets. The subsidiary of Germany-based Knauf said that it was one of just a few companies in the US building-product sector that has signed onto SBTi. The company has agreed to reduce its carbon emissions from manufacturing (Scope 1 and 2) at the WB-2°C (well below 2°C) level, which equates to a 30% reduction in greenhouse gas emissions by 2030. USG has also committed to reducing carbon emissions associated with purchased raw materials and services, transportation and waste generation (Scope 3) by 15% within the same period.

Poland: Saint-Gobain has signed a renewable electricity agreement (Power Purchase Agreement) with Tion Renewables AG (currently being renamed from Pacifico Renewables Yield AG), the German wind and solar power producer. The 15-year agreement will run from 2025 and cover around 45% of Saint-Gobain Poland's electricity needs.

"This power supply agreement is an important milestone for Saint-Gobain in Poland. It will contribute to a significant reduction in our CO₂ emissions, in line with the group's commitment to achieve carbon neutrality by 2050' said Joanna Czynsz-Piechowiak, chief executive officer of Saint-Gobain Poland. "It will enable a reduction in CO₂ emissions of 135,000t/yr, i.e. nearly 20% of Saint-Gobain's scope 1 and 2 emissions in Poland.

The PPA foresees the purchase of approximately 190GWh of wind energy annually. This is equivalent to supplying about 100,000 European homes with renewable electricity each year. The total capacity of the wind farms is equivalent to circa 52MW spread over three sites and 20 wind turbines. This announcement illustrates how Saint-Gobain is stepping up the pace on its carbon neutrality roadmap and comes in the wake of the recent endorsement by the Science Based Targets initiative of the group's commitments to reduce CO₂ emissions by 2050.

Belgium: Etex has launched its new Road to Sustainability 2030 circularity and decarbonisation strategy. The strategy sets out the company’s 2030 ambitions under five headings. Under health, safety and well-being, Etex aims to reach zero fatalities, burnouts or incidents of harm; under customer engagement, it aims to build a sustainable roadmap for each product platform by 2025; under diversity, equity and inclusion, it will extend its policies, procedures and practices across all teams. Meanwhile, under decarbonisation, Etex will reduce Scope 1 and 2 greenhouse gas emissions by 35% compared to 2018, and under circularity it will use over 20% of circular input as raw material, send zero waste to landfill, use 100% recycled packaging and reduce plastic packaging by 20% compared to 2018, offer a product take-back service across 80% of its European markets and dedicate 50% of its innovation resources to sustainability.

Chief executive officer Bernard Delvaux said “Today Etex has sustainability as a guiding compass of business transformation, with concrete objectives that reflect the company’s ambition. We are on an exciting journey towards improving sustainability in the short and long term. We know there is a long road ahead, which is why we invite all our stakeholders to further support us in becoming a leading benchmark in our industry.”

France: SaintGobain says that the Science Based Targets initiative (SBTi) has approved its CO₂ reduction targets. The group plans to achieve net zero CO₂ emissions, both direct and indirect, along its entire value chain by 2050. This will entail a reduction in CO₂ emissions of at least 90% in the three scopes by 2050, with additional sequestration projects planned for residual emissions.

Saint-Gobain's commitments to reduce, in absolute terms, by 2030 from 2017 its direct and indirect CO₂ emissions (scopes 1 and 2) by 33% and its scope 3 emissions, mainly linked to purchasing and transport, by 16% by 2030 was already validated in 2020 by the SBTi. The group says it will continue to accelerate its roadmap, notably through improvements in energy efficiency, product weight reduction, increased recycled content and the use of green energies, in order to align its targets with the most demanding trajectory, which limits the rise in temperatures to 1.5°C.

US: CertainTeed plans to spend US$1.1m towards installing recycling equipment at its Palatka gypsum wallboard plant in Florida. The upgrade will increasing the recycled content of its wallboard products manufactured at the unit by 18,000t/yr while also reducing the site’s CO₂ emissions by 2260t/yr.

The new recycling equipment at the Palatka plant will work by grinding the waste gypsum and waste paper down into fine particles, allowing the plant to capture and internally recycle the materials, which are sorted and then reintroduced to the production process at the plant. The kit will be powered by electricity and will replace older machines currently powered by diesel, lowering the plant’s Scope 1 Emissions from its operations. Additionally, by consuming more recycled gypsum, the plant will become less reliant on feedstock that is shipped to the site from external sources, allowing the unit to also reduce Scope 3 Emissions associated with transporting the feedstock.

Jay Bachmann, the Vice President and General Manager of CertainTeed Interior Products Group, said, “The new technology in Palatka will allow us to increase the recycled content in our products, reduce our carbon CO₂ at the plant, and strengthen our operations at a time of unprecedented consumer demand for gypsum wallboard in the south-eastern US.”

The investment at the Palatka plant follows similar investments that will increase the recycled content of wallboard made at CertainTeed’s wallboard plants in Silver Grove in Kentucky and Nashville in Arkansas. Parent company Saint-Gobain continues to roll out its global ‘Grow and Impact’ strategy, which includes reducing waste and increasing recycling efforts at its manufacturing sites.

Japan: Chiyoda Ute has reported that it has produced 100% climate neutral and 100% recycled wallboard at its Yokkaichi factory in Mie Prefecture. The company says that, to the best of its knowledge, this is a world first. The board was produced on 1 August 2022.

Speaking about the achievement, Frederick Knauf, Chiyoda Ute’s representative managing director said “We do not know whether another manufacturer has achieved this already on an industrial scale, but it shouldn't matter who was first, as the whole industry needs to come to this point. Being second, third or 25th is the same achievement from my point of view."

New Zealand: Fletcher Building Materials recorded consolidated sales of US$5.37bn during its 2022 financial year, up by 4.7% year-on-year from US$5.13bn in the previous year. Its net earnings also rose by 42%, to US$273m from US$193m.

The group's building materials division, which includes Winstone Wallboards, contributed US$1.02bn-worth (17%) of group sales. The business delivered 'strong' volumes, with pricing initiatives effectively offsetting cost inflation. The latter particularly impacted imports of raw materials. The business made capital expenditure investments of US$129m, of which US$98.4m went towards the construction of Winstone Wallboards' upcoming Tauriko gypsum wallboard plant in the Bay of Plenty region. The plant's commissioning in 2023 will increase the company's production capacity by 30% and reduce its CO₂ emissions and waste generation.

Fletcher Building Materials chief executive officer Ross Taylor said "The 2022 financial year has not been without its challenges. Global and national supply chain disruptions have continued into the third year of the Covid-19 pandemic. In New Zealand, surging plasterboard orders following the first quarter lockdown outstripped our ability to supply, despite our manufacturing facilities running at record levels. In recognition of our key role as a local manufacturer in keeping the market supplied, we carried out a range of measures to address the shortage including operating production lines 24/7, running down inventory, importing additional product, and establishing an emergency supply pool." Taylor added "The New Zealand Commerce Commission recently published its interim market study report into residential building supplies. The final report and recommendations will be published in December 2022 and in the meantime we will continue to work collaboratively with both the commission and the government."

France: Saint-Gobain has launched a Euro1.5bn bond issue. The issue consists of three Euro500m tranches, with maturities of three, six and 10 years. It is linked to two indicators of Saint-Gobain sustainability targets, namely its progress towards a 33% reduction in Scope 1 and 2 CO₂ emissions and an 80% reduction in production waste between 2017 and 2030. The company said that the transaction will enable it to extend the average maturity of its debt with mid to long-term funding.

CFO Sreedhar Natarajan said “Sustainable growth is at the heart of Saint-Gobain’s business model. The issuance of a sustainability-linked bond demonstrates the strength of Saint-Gobain’s commitments set out in its environmental and social governance roadmap. The group aims in particular to tackle the big energy and environmental challenges faced by the world with its contribution to reduce CO₂ emissions in its operations, and also decarbonise construction and industrial activities through its sustainable solutions”

UK: Portugal-based Gypfor has agreed to sell its upcoming Newport gypsum wallboard plant to Germany-based Knauf. Gypfor began building the plant at Associated British Ports’ Port of Newport in March 2021. Knauf estimates that it will commission it later in 2022, and commence full operations in 2023. The plant will be equipped with solar and wind power plants, as well as on-site gypsum wallboard recycling facilities. 54 people will be employed in gypsum wallboard production at the site. Knauf says that the addition of the new plant to its existing facilities at Immingham, Lincolnshire, and Sittingbourne, Kent, will enlarge its UK capacity by 20%.

Knauf’s UK managing director Ian Stokes said “This new plant will significantly increase our ability to service customers throughout the UK, and particularly those in South Wales, the Midlands and the South-West of England. It is a very exciting move for Knauf and, following recent investment in increasing the capacity of Knauf Insulation, reflects the confidence of the Knauf Group in the UK construction sector.”