Gypsum industry news

UK: XPO Logistics, a leading global provider of freight transportation services, has been awarded a multi-year contract renewal by Etex. XPO distributes several hundred thousand tonnes of products for Etex each year in the UK. It uses a dedicated fleet to deliver gypsum wallboard to builders’ merchants and building sites from Etex's manufacturing plants in Bristol and Ferrybridge. It also supports distribution centres in Basildon and Grangemouth. The customised network is managed by XPO teams on-site, and draws on XPO’s wider resources for transport and storage as needed to supplement seasonal fluctuations in demand. Under the new agreement, XPO will remain a single-source provider for transport and on-site logistics management, and will collaborate with Etex to prepare for higher distribution volumes. Etex’s planned significant investment in the Bristol site will increase production and warehousing capacity to support the company’s expansion in the UK.

UK: Knauf has maintained its 'Excellent' rating for BES 6001 Responsible Sourcing of its wallboard, laminated plasterboard and gypsum powder products, a rating that it has held since 2019.

The BES 6001 standard is a means of securing certification to demonstrate through independent, third-party certification, that raw materials for products certified against the scheme have been responsibly sourced and that Knauf manufactures these products in a way that minimises the impact on the environment and natural resources. Knauf said that this was a 'significant achievement,' requiring input from all areas of its business, from procurement and manufacturing activities to distribution to customers.

Earlier this month the German Gypsum Association (GIPS) gave its approval for an inventory of natural gypsum deposits in Germany that was presented at the Conference of Economics Ministers that took place in early July 2022. The Federal Commission on Geosciences (BLA-GEO) had previously been given the job of taking an inventory of deposits and this was then put in front of the policy makers. The association’s stance was all about securing future supplies. In its view there will be no large-scale alternatives to natural gypsum supplies in the foreseeable future due to low recycling rates and falling production of flue gas desulfurisation (FGD) gypsum as coal power plants are shut down. So a list of where natural gypsum might be found is the start of conversations about which ones might be mined. Readers who are interested can download the inventory of German gypsum deposits here.

Security of supply of raw materials has been in the air since the end of the coronavirus lockdowns started to cause supply chain disruption around the world and the Russian invasion of Ukraine further exacerbated this and rocked energy markets. Part of the reaction to this new reality could be seen in a conference that the Federal Institute for Geosciences and Natural Resources (BGR) and the German Resource Research Institute (GERRI) ran, also in early July 2022. The state of German gypsum supplies was presented at this event too. The BGR-GERRI conference came up with a ten-point plan to strengthen the supply of raw material. Some of these recommendations were to grow domestic raw material extraction, expand recycling and the circular economy and keep supply chains closer internationally, ideally within Germany and Europe.

A focus on gypsum supplies isn’t restricted to Germany though. The issue arose in late July 2022 during an earnings call for US-based Eagle Materials’ first quarter results. These kinds of questions from analysts about supply of raw materials are common for a public company but it reinforces the general declining trend around the world of synthetic gypsum supplies. Craig Kessler, the chief financial officer of Eagle Materials, mentioned that a scarcity of synthetic gypsum might be creating cost pressures for other gypsum wallboard producers. Although he was quick to describe his company as a “natural gas or natural gypsum oriented business.” The wider picture in the US is that the ratio of natural to synthetic gypsum production has grown over the last decade. United States Geological Survey (USGS) data shows that it was 37% / 49% in 2011 compared to 53% / 32% in 2021, with the remainder imported in each year.

One more point to make here is that many of the new gypsum wallboard plant projects announced in the over the last few months have involved recycling in one form or another. For example, Siniat’s forthcoming wallboard plant in Bristol in the UK aims to achieve 30% post-consumer gypsum recycling. CertainTeed’s current upgrade plans for its Palatka plant in Florida are also recycling-based. Similarly, the subsidiary of Saint-Gobain also completed an upgrade in June 2022 to allow more recycling at its Nashville plant in Arkansas.

Finally, some of the thinking in Germany and elsewhere has been influenced by the current geopolitical situation in Ukraine. However, one potential consequence of prolonged disruption to European energy markets could be a delay to the decline of coal power plants as plant lifespans are elongated or even new ones built. This in turn could mean more synthetic gypsum supplies in Europe in the short to medium term. How all of this plays out in the placement of new gypsum wallboard plants in Europe over the next few years will be interesting to observe.

Switzerland/UK: Sika says it plans to complete its planned acquisition of MBCC Group in the first half of 2023 following the decision by the UK Competition and Markets Authority (CMA) to further investigate the merger. Previously the construction chemicals company intended to close the transaction by the end of 2022. Sika signed a deal to buy MBCC Group, formerly BASF Construction Chemicals, in November 2021.

Thomas Hasler, the chief executive officer of Sika, said "Sika has already received unconditional regulatory approval across a number of jurisdictions, including Japan, China, Brazil, South Africa, Saudi Arabia, Turkey and Thailand. For a transaction of this magnitude a detailed analysis is not unusual. The adapted timeline for the closing does not impact the strategic attractiveness of the transaction. It remains highly accretive, and our expectation that it will generate annual synergies of Euro160m - 185m is unchanged."

UK: Etex subsidiary Siniat says that its upcoming second gypsum wallboard plant at its Bristol site will help it to achieve 30% post-consumer gypsum recycling in its UK wallboard production by 2025. The new plant is scheduled for commissioning in 2023. The producer secured its supply of recycled gypsum from local waste management subsidiary Crucible Gypsum Recycling in 2020. The plant will also supply some of its water consumption from rainwater harvesting on-site. Electric charging stations will eventually support a 100% electric forklift fleet at the site.

Siniat will also invest Euro11,900 towards cycle and pedestrian paths to improve access to the Bristol site.

UK: The Competition and Markets Authority (CMA) has formally launched the first phase of a merger inquiry into the proposed acquisition by Saint-Gobain of GCP Applied Technologies. The competition body said that proposed merger had met the threshold for investigation under UK law. The CMA will now decide whether to refer the merger for further scrutiny by 21 September 2022.

Saint-Gobain said it had agreed to buy construction chemicals producer GCP Applied Technologies for Euro2bn in late 2021 with a conclusion date to the transaction by the end of 2022.

UK: Saint-Gobain has brought its British Gypsum, Celotex and Isover gypsum wallboard and insulation brands together under the Saint-Gobain Interior Solutions portfolio. The marketing labelling is intended to allow customers to access products, solutions and services.

Dean O’Sullivan, the managing director of Saint-Gobain Interior Solutions, said “This collective three-brand approach allows customers to access the know-how and expertise of each brand in one place, through our dedicated sector and sales teams. This will bring a range of benefits to our customers, allowing us to provide even better support, with even simpler access to our market-leading systems and products.” He added, ”Each brand continues to play an important part, but by having a single point of contact and sector specific teams, we are confident our customers will realise the strength in collaboration and solutions that ultimately help them meet their needs for outstanding performance, longevity and value.”

UK: Portugal-based Gypfor has agreed to sell its upcoming Newport gypsum wallboard plant to Germany-based Knauf. Gypfor began building the plant at Associated British Ports’ Port of Newport in March 2021. Knauf estimates that it will commission it later in 2022, and commence full operations in 2023. The plant will be equipped with solar and wind power plants, as well as on-site gypsum wallboard recycling facilities. 54 people will be employed in gypsum wallboard production at the site. Knauf says that the addition of the new plant to its existing facilities at Immingham, Lincolnshire, and Sittingbourne, Kent, will enlarge its UK capacity by 20%.

Knauf’s UK managing director Ian Stokes said “This new plant will significantly increase our ability to service customers throughout the UK, and particularly those in South Wales, the Midlands and the South-West of England. It is a very exciting move for Knauf and, following recent investment in increasing the capacity of Knauf Insulation, reflects the confidence of the Knauf Group in the UK construction sector.”

UK: Global Gypsum Magazine is ready for the Hillhead 2022 quarrying, construction and recycling show that takes place on 21 – 23 June 2022 taking place in Derbyshire. You can find Global Gypsum Magazine at stand PB14 in the Main Pavilion. The event was originally planned to take place in June 2021 but was postponed for one year following the UK coronavirus-related lockdowns. Held in a limestone quarry, the organisers say that it is the largest exhibition of its kind anywhere in the world.

UK: The Competition and Markets Authority (CMA) is considering whether the proposed acquisition by Saint-Gobain of GCP Applied Technologies could result in the creation of a relevant merger situation or lessen market competition generally. It has asked any interested party to comment on the transaction by mid-June 2022.

Saint-Gobain said it had agreed to buy construction chemicals producer GCP Applied Technologies for Euro2bn in late 2021 with a conclusion date to the transaction by the end of 2022.